一、Advantages of high pressure photocatalytic reactor:
1、The wavelength of light source can be adjusted by filter, which can be used for different processes.
2、The reactor can be flexibly replaced to realize the reaction of different pressure, temperature, material and volume, as well as the functions of ventilation and feeding in the process.
3、The touch screen control mode is adopted to control the reactor stirring, temperature, light source output power and lamp parameters.
4、Internal magnetic stirring: no exposed rotating parts to ensure no leakage and safer test.
5、Equipped with high-quality needle valve, it solves the sealing problem of traditional valve.
6、Equipped with safety explosion-proof valve, it adds a layer of safety to the experimental safety environment.
7、Equipped with safety explosion-proof valve, it adds a layer of safety to the experimental safety environment. According to the time set, no one is responsible, which saves the valuable time of the test personnel.
8、The internal module is used for heating and temperature control, with fast heating speed and accurate temperature control.
9、Independent research and development of temperature control system to prevent temperature overshoot, which can quickly balance and stabilize the temperature.
10、The kettle body is separated from the control system: it facilitates disassembly and improves work efficiency.
二、Precautions for high pressure photocatalytic reactor:
1、In order to ensure safe use, please be sure to connect the ground wire. Please do not operate with empty materials or dry burn.
2、In order to prolong the use of the product, the motors of the magnetic stirrer are equipped with fan heat dissipation function. Therefore, during the heating experiment, especially the high-temperature heating experiment, the instrument cannot be used for heating alone. Do not adjust the motor to the rotating or medium speed rotating state (or idling). To prevent the motor and electrical appliances from being damaged by high temperature radiation.
3、At the end of high-temperature heating, please turn off the heating switch first, and then turn off the mixing switch after the residual temperature dissipates for a few minutes. The temperature of the heating part is high. Be careful when working to avoid scalding.
4、When the new machine is used, there is white smoke and peculiar smell in the sleeve heated by electric heating wire. It is normal for the color to change from white to brown and then to white. Because the glass fiber contains oil and other compounds in the production process, it should be placed in a ventilated place and can be used normally after disappearing in a few minutes.
5、When the liquid enters the sleeve, please quickly turn off the power supply and put the instrument in a ventilated place until it is dry, so as to avoid the danger of electric leakage or electrical short circuit.
6、When the ambient humidity is relatively high, induced electricity may be transmitted to the shell through the insulation layer. Please be sure to connect the ground wire to avoid leakage and pay attention to ventilation.
7、When not in use for a long time, please keep the instrument in a dry and corrosion-free environment.
8、If the content of this manual is different due to the improvement of the product or the product involved in this manual, please call the manufacturer for details without notice.
Advantages and precautions of high-pressure photocatalytic reactor. After reading this article, I believe everyone has a certain understanding of photocatalytic reactor! I hope it will help you.
Contact Us
Address：上海市金山區(qū)和豐路168號
Email：HTLAB@htlab.cn
當前位置：